GameCuki is reader-supported. When you buy through links on our site, we may earn an affiliate commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Learn more.
A Ryzen 7 9800X3D is easy to feed and still easy to overheat if you pair it with the wrong hardware. Choosing the best CPU cooler for 9800X3D builds is mostly a question of air or liquid, then of what fits in your case and how loud you will tolerate. These eight picks cover dual-tower air coolers from budget to premium, a compact single tower, and three AIOs from 360mm to 420mm.
Still choosing parts? Our best motherboard for 9800X3D guide covers the board that sits under the cooler, and the best CPU for gaming roundup shows where the 9800X3D fits among current chips.
Best CPU Cooler for 9800X3D: Our Picks in Detail
GameCuki may earn a commission if you buy through the links below. That never changes which coolers make the list or how they rank.
1
Best Air Cooler for Quiet Builds
Noctua NH-D15 G2 LBC
Bottom line: A dual-tower air cooler built with AM5 in mind, it gives a 9800X3D quiet, steady cooling without a pump or leak risk, as long as your case is tall enough.
The NH-D15 G2 is the second generation of Noctua's flagship dual-tower cooler. This LBC version is the one meant for AMD AM5 chips.
Pros & Cons
Pros- Low Base Convexity base is made for flat CPUs like AM5 processors
- Eight heatpipes and 20% more surface area than the first NH-D15
- Two 140mm fans with PWM control stay near silent at idle
- No pump, no coolant and no tubes to fail
- Offset design clears the top PCIe slot on most current motherboards
- Single fan mode leaves 59mm of RAM clearance for tall memory kits
- Sound stays low even when the 140mm fans ramp up
Cons- At 168mm tall it will not fit slim or compact cases
- With both fans on, RAM clearance drops to 32mm
- It is one of the most expensive air coolers you can buy
Why We Picked It
A 9800X3D rated at 120W does not need a 360mm AIO to run well, and this cooler proves it. The big fins and eight heatpipes handle the heat, and the 140mm fans do it at low speed. The LBC base matches the flatter AM5 heat spreader, so you get better contact without offset mounting tricks.
Who It's For
You want a gaming PC that stays quiet during long sessions and you would rather never think about the cooler again. A tower with plenty of side-panel room and a normal RAM kit fits it easily.
You also like the idea of buying one part and keeping it. Air coolers have no pump or coolant to wear out.
Specs & Configurations
- Type
- Dual-tower air cooler
- Heatpipes
- 8
- Fans
- 2x NF-A14x25r G2 140mm
- Height
- 168mm
- RAM clearance
- 59mm (single fan), 32mm (both fans)
- Socket
- AM5 and AM4 (LBC version)
2
Best Value Air Cooler for 9800X3D
Thermalright Phantom Spirit 120 SE
Bottom line: A seven-heatpipe dual-tower cooler with two 120mm fans, it gives a 9800X3D air cooling that stands up to far pricier coolers at a fraction of the cost.
Thermalright has built a following by delivering high-end air cooling at low prices, and the Phantom Spirit 120 SE is the model many 9800X3D builders land on.
Pros & Cons
Pros- Seven 6mm heatpipes feed two aluminum fin towers
- Two 120mm PWM fans with S-FDB bearings
- Fan noise stays at or below 25.6 dB(A)
- Compact at 154mm tall, it fits many mid-tower cases
- Mounting hardware for both AMD and Intel sockets is in the box
- The black finish suits a dark build
- Costs far less than flagship air coolers
- Handles a 120W CPU with room to spare
Cons- Not a good fit for small cases with low side panels
- Installation takes longer than an AIO because of the two towers
- Both towers and the front fan add steps to the installation
Why We Picked It
Two towers, seven heatpipes and two 120mm fans give this cooler plenty of surface area for a CPU that does most of its work in games. At 154mm tall it is also shorter than the largest air coolers, so it fits more cases. For many 9800X3D builds it covers the same job as a more expensive cooler, and the saved money can go to a graphics card.
Who It's For
You are building a gaming PC with a 9800X3D and a fast GPU, and you want serious cooling without a premium price tag. A mid-tower with space above the motherboard fits it.
You are comfortable with a slightly longer installation in exchange for lower cost. The cooler suits a build where airflow matters more than pump heads and RGB.
Specs & Configurations
- Type
- Dual-tower air cooler
- Heatpipes
- 7 x 6mm
- Fans
- 2x TL-C12B V2 120mm, up to 1500 RPM
- Airflow
- 66.17 CFM, up to 25.6 dB(A)
- Size
- 125 x 135 x 154mm
- Socket
- AM4, AM5, LGA 1700, LGA 1851
3
Best Budget Cooler for 9800X3D
Thermalright Peerless Assassin 120 SE
Bottom line: One of the cheapest dual-tower coolers worth buying, it keeps a 9800X3D cool in games with six heatpipes and two fans and costs less than most single-tower options.
The Peerless Assassin 120 SE has become the standard answer when someone asks for good cooling at a very low price. It brings a dual-tower layout to a cooler that costs about as much as a single-tower model.
Pros & Cons
Pros- Six sintered copper heatpipes with a pure copper base
- Two 120mm PWM fans for a push-pull style airflow path
- Fan noise at or below 25.6 dB(A)
- 155mm height fits most mid-tower cases
- Mounting parts for Intel and AMD are included
- Leaves room for memory under the front fan
- A dual-tower design at a budget price
- Suits a 9800X3D that mostly runs games
Cons- AMD installation uses the motherboard backplate, which is not in the box
- Six heatpipes, compared with seven on the Phantom Spirit
- Not the right choice for a heavily overclocked, all-core workload
Why We Picked It
Gaming loads on a 9800X3D are modest compared with an all-core workstation load, and a cooler like this has the surface area to match them. The design leaves space between the towers and above the RAM, and the standard 120mm fans are easy to replace later. It is a sensible way to put money into a graphics card instead.
Who It's For
Your build budget is tight and the CPU is the part you cannot compromise on. You want a cooler that handles games, streaming and everyday use without noise that stands out.
You are fine with a plain look and a manual install. Check that your motherboard has its own AMD backplate, since the cooler uses it.
Specs & Configurations
- Type
- Dual-tower air cooler
- Heatpipes
- 6 x 6mm
- Fans
- 2x TL-C12C 120mm, 1550 RPM
- Airflow
- 66.17 CFM, up to 25.6 dB(A)
- Size
- 125 x 135 x 155mm
- Socket
- AM4, AM5, LGA 1700, LGA 1851
4
Best Air Cooler for Overclocking
be quiet! Dark Rock Pro 6
Bottom line: A seven-heatpipe dual-tower cooler rated for 300W TDP, it suits a tuned 9800X3D and a quiet build, with a switch for full-speed or semi-passive fan behavior.
The Dark Rock Pro 6 is be quiet!'s flagship air cooler and the quiet-focused alternative to the Noctua above. It keeps the black, rounded look the Dark Rock line is known for.
Pros & Cons
Pros- Rated for 300W TDP, far above what a 9800X3D draws
- Seven copper heatpipes with a heatsink built for overclocking
- Mode switch picks maximum cooling or semi-passive fan stop
- Fans stop below 40% PWM in semi-passive mode
- Pre-installed mounting bridge speeds up installation
- Rail-mounted front fan can be moved to improve RAM clearance
- Silent Wings fans use fluid-dynamic bearings and 6-pole motors
- Covers AM5 and AM4 on the same mounting system
Cons- A large cooler that needs a roomy case, so check the clearance before you order
- Costs more than Thermalright's dual towers
Why We Picked It
A 300W rating gives a 9800X3D plenty of headroom, even if you tune it with Curve Optimizer or Precision Boost Overdrive. The mode switch is useful in real builds: semi-passive mode lets the fans stop during light use, while the full mode keeps temperatures lower under load. The rail-mounted front fan also helps when your RAM has tall heat spreaders.
Who It's For
You overclock or tune your 9800X3D and want a cooler that stays quiet while you do. A tower with a wide side panel and a mid-range motherboard will fit it.
You also want a build that is silent when you are browsing or watching video. Semi-passive mode keeps the fans off until the CPU needs them.
Specs & Configurations
- Type
- Dual-tower air cooler
- Heatpipes
- 7
- Fans
- Silent Wings 135mm and 120mm PWM
- Rated TDP
- 300W
- Max fan speed
- 2000 RPM
- Noise
- up to 32.4 dB
- Socket
- AM4, AM5, LGA 1700, LGA 1851
5
Best Compact Cooler for Small Cases
Thermalright Assassin X120 Refined SE
Bottom line: A slim single-tower cooler with four heatpipes and one 120mm fan, it suits compact and mid-size cases where a dual tower will not fit.
The Assassin X120 Refined SE is a narrow budget tower for builds where a dual tower will not fit. It is a simple step up from a basic stock-style cooler.
Pros & Cons
Pros- Only 71mm wide, so it clears RAM and VRM heatsinks easily
- 148mm height fits many compact cases
- Four 6mm heatpipes with AGHP technology
- Lightweight at 1.42 lb, easier on the motherboard
- One 120mm PWM fan at or below 25.6 dB(A)
- Intel and AMD mounting hardware is included
- Simple, quick installation
Cons- One fan and four heatpipes give less headroom than a dual tower
- Not the best choice for a heavily overclocked 9800X3D
- Cooling is adequate, but noise rises faster under sustained load
Why We Picked It
A 9800X3D can run games at moderate temperatures with a solid single tower, and this one gives you the heatpipe layout to do that. Because it is narrow, it leaves room around the CPU socket, which helps with tall RAM kits and VRM heatsinks. It is the pick when a case limits you to a smaller cooler.
Who It's For
You are building in a compact case or a mid-tower with limited clearance and a dual tower will not fit. You mostly play games and do not push the CPU with long all-core workloads.
You want a low-cost, low-risk way to cool the chip while keeping the budget for the GPU.
Specs & Configurations
- Type
- Single-tower air cooler
- Heatpipes
- 4 x 6mm
- Fan
- TL-C12C 120mm, 1550 RPM
- Airflow
- 66.17 CFM, up to 25.6 dB(A)
- Size
- 125 x 71 x 148mm
- Weight
- 0.645 kg (1.42 lb)
6
Best 360mm AIO for Value
ARCTIC Liquid Freezer III Pro 360 A-RGB
Bottom line: A 360mm AIO with a VRM fan, offset AM5 mounting and a 6-year warranty, it gives a 9800X3D liquid cooling at a price below most rivals.
The Liquid Freezer III Pro is the revision of one of the most talked-about 360mm AIOs. It adds the features that earlier models left out, such as the VRM fan and cable management.
Pros & Cons
Pros- Native offset mounting moves the cold plate toward the CPU hotspot
- P12 Pro fans run quietly at low speeds and push hard at max
- Built-in PWM VRM fan cools the motherboard power section
- Fan cables run inside the tubing, leaving one cable to connect
- 3 x 120mm radiator gives plenty of cooling headroom
- A-RGB lighting on the pump and fans
- 6-year warranty
- Priced under many other 360mm AIOs
Cons- A 360mm radiator needs a case with top or front support for it
- It is overkill for a 9800X3D if you only play games
Why We Picked It
If you want an AIO for a 9800X3D, this one covers the basics without an inflated price. The offset mounting is aimed at where AM5 chips make heat, and the fans keep the sound under control at everyday speeds. The built-in VRM fan is a thoughtful extra that most AIOs skip.
Who It's For
You prefer the clean look of an AIO and the open space around the CPU socket it gives you. A case with a 360mm radiator mount and a build that favors RGB and cable tidiness suits it.
You also like having a long warranty on a part that has a pump inside it.
Specs & Configurations
- Type
- 360mm AIO
- Fans
- 3x P12 Pro, up to 3000 RPM
- Airflow
- up to 77 CFM
- Radiator length
- 15.7 inches overall
- Warranty
- 6 years
- Socket
- AM4, AM5, LGA 1700, LGA 1851
7
Best AIO for a Custom Look
Cooler Master MasterLiquid 360 Atmos
Bottom line: A 360mm AIO with a dual-chamber pump, SickleFlow Edge fans and a customizable top cover, it suits builders who want strong cooling and a showpiece pump head.
The MasterLiquid 360 Atmos is Cooler Master's high-end 360mm AIO, and its personalizable pump head sets it apart from most coolers in this class.
Pros & Cons
Pros- Dual-chamber pump pushes water pressure toward the CPU hotspot
- Three pre-installed SickleFlow Edge fans with PWM control
- Personalizable pump cover with your own 3D designs
- aRGB Gen 2 lighting
- Redesigned brackets simplify AM5 and Intel installs
- 5-year warranty
- Slim 360mm radiator fits most cases with support
- Pump top cover is made from recycled plastic
Cons- The pump cover customization needs a 3D printer or a design file
- A 360mm radiator needs a case that supports it
Why We Picked It
The dual-chamber pump is aimed at the hotspot on high-power CPUs, and the SickleFlow Edge fans give the radiator strong airflow. The brackets are simple enough that mounting on AM5 is straightforward. It also doubles as a design piece, because you can print a custom top cover.
Who It's For
You are building a gaming PC where looks matter as much as temperatures, and you want a pump head that stands out behind a glass side panel.
You also enjoy tinkering. The top cover is designed to be swapped and personalized, so you can match the build to your own style.
Specs & Configurations
- Type
- 360mm AIO
- Fans
- 3x SickleFlow 120 Edge, up to 2500 RPM
- Airflow
- 70.7 CFM
- Radiator length
- 15.5 inches overall
- Warranty
- 5 years
- Socket
- AM4, AM5, LGA 1700, LGA 1851
8
Best 420mm AIO for Quiet Cooling
be quiet! Silent Loop 3 420mm
Bottom line: A 420mm AIO with three 140mm fans and a three-chamber pump, it gives a 9800X3D the lowest-noise liquid cooling here if your case has room for the radiator.
The Silent Loop 3 420mm is be quiet!'s big-radiator AIO, built to cool a hot CPU without spinning the fans fast.
Pros & Cons
Pros- Three-chamber pump design reduces turbulence and noise
- Dampened pump with an adjustable 6-pole motor
- Silent Wings 4 140mm fans with corner pieces cut noise
- A 420mm radiator gives you the most surface area on this list
- Easy refill port for topping up coolant over time
- Wide cold plate with broad CPU coverage
- ARGB lighting on the pump block
- Fans stay quiet at low speeds, and a big radiator needs fewer RPM
Cons- Only works in cases that support a 420mm radiator
- The 3-year warranty is shorter than other AIOs here
- More cooler than a 9800X3D needs for gaming alone
Why We Picked It
A 420mm radiator has more fin area than a 360mm one, which lets the 140mm fans run slower for the same cooling. The three-chamber pump is meant to cut noise, and the refill port is a rare feature in a sealed loop. It adds a measure of long-term peace of mind that standard AIOs do not offer.
Who It's For
You have a full-size case with a 420mm mount and you want liquid cooling that stays out of the way. The cooler suits a build that doubles as a workstation, where long sessions and quiet matter.
You also plan to keep the system for years, and a refillable loop fits that plan.
Specs & Configurations
- Type
- 420mm AIO
- Fans
- 3x Silent Wings 4 140mm PWM
- Max fan speed
- 2500 RPM
- Noise
- up to 34.3 dB
- Warranty
- 3 years
- Socket
- AM5, AM4, LGA 1700, LGA 1851
Air Cooler or AIO for a 9800X3D?
The 9800X3D is rated at 120W, and gaming loads usually stay well under what a good air cooler can handle. That is why dual-tower coolers like the Noctua NH-D15 G2 and the Phantom Spirit 120 SE are enough for most builds. An AIO is worth it if you want an open socket area, a particular look, or a bit more headroom for tuning.
Heat can still build up in some workloads. Some builders see temperatures above 90°C with a 360mm AIO while compiling shaders, which suggests that mounting quality and fan curves matter as much as the cooler type.
What to Check Before You Buy a CPU Cooler for a 9800X3D
Socket support
The 9800X3D uses the AM5 socket, and every cooler on this list lists AM5 support. AM4 coolers with AM5 brackets also fit, so an older cooler may work if its kit includes them.
Cooler height and radiator size
Check the maximum CPU cooler height in your case specs against the cooler height listed above. For AIOs, confirm that your case supports a 360mm or 420mm radiator at the top or front.
RAM and PCIe clearance
Large dual-tower coolers can sit close to tall RAM and the top graphics slot. Noctua lists 59mm of RAM clearance in single fan mode and 32mm with both fans, so measure your kit first.
Noise and fans
Larger fans and radiators can run slower for the same airflow, which keeps noise down. Look for PWM fans and a fan curve you can adjust in the BIOS.
Which Is the Best CPU Cooler for the 9800X3D?
The Noctua NH-D15 G2 LBC is the best CPU cooler for 9800X3D builds that want quiet, reliable cooling with no pump, and the Thermalright Phantom Spirit 120 SE delivers most of the same result for much less. Pick the Peerless Assassin 120 SE if the budget is tight, the Dark Rock Pro 6 if you plan to tune the chip, and the Assassin X120 Refined SE for a compact case. Among the AIOs, the ARCTIC Liquid Freezer III Pro 360 is the value choice, the Cooler Master Atmos 360 is for show builds and the be quiet! Silent Loop 3 420mm is for roomy cases and low noise. Whichever you choose, check the fit in your case first.