Best Mouse Skates for Logitech G Pro X Superlight 2 in 2026

ICE V2 skates turn the Superlight 2's sluggish stock glide into a fast, smooth one. They're made from PTFE with 2.5D rounded edges that help prevent fraying and wear on your mousepad, an anti-collapse filling design for steady support and a 0.7 to 0.8mm thickness that keeps the sensor at a sensible height. 3M adhesive keeps them in place. They're inexpensive, and EspTiger makes separate cuts for the Superlight 2 DEX and 2C, which makes them the best mouse skates for the Logitech G Pro X Superlight 2 for most players.

A Superlight 2 owner on a cloth pad who wants a clearly faster, smoother glide than the stock feet. The 0.7 to 0.8mm thickness keeps the sensor at a sensible height, and the rounded edges help prevent fraying on the pad.
EspTiger cuts versions for the 2 DEX and 2C, so most Superlight 2 variants are covered.

Superglide skates are made from strong aluminosilicate glass, which Pulsar says won't wear down like PTFE feet, so you can use them almost permanently. The Type-C version adds a micro-textured surface that gives you a smooth glide with noticeably more stopping power than glossy glass, which helps with micro-adjustments and flicks. Pulsar makes it specifically for the Superlight 2 and G Pro X2 Superstrike, with polished, rounded edges. Pulsar recommends against using it on glass mousepads.

A competitive player on a cloth or hybrid pad who wants a long-lasting glass glide that still stops where they want. The micro-textured surface helps with micro-adjustments and flicks, and the glass is made for near-permanent use.

Type-S uses a glossy, ultra-low friction surface, so it's faster and smoother than the textured Type-C. That makes it great for fast tracking in shooters, and its glass construction holds up far longer than PTFE. The tradeoff is control: on some pads the mouse barely wants to sit still, so it suits players who already prefer a very fast setup.

A tracking-heavy player on a cloth pad who already prefers a very fast setup. The glossy glass makes the Superlight 2 feel like it is floating, which suits fast tracking in shooters, and the glass holds up far longer than PTFE.

SNOW skates use snowflake-shaped protrusions that reduce contact with the pad. On finely textured pads, that brings out more texture feedback and a slightly more controlled feel than ICE, while on smoother or coarse surfaces SNOW glides more smoothly than ICE. They share ICE's 2.5D edges, anti-collapse filling and 3M adhesive.

A player who wants a faster-than-stock glide with a bit more feedback. The snowflake-shaped protrusions bring out texture feedback on finely textured pads and glide smoothly on coarser surfaces, with the same 2.5D edges and 3M adhesive as the ICE line.

These pre-cut 0.8mm PTFE skates are cut to the Superlight 2's shape and thickness, with rounded edges that won't scratch your pad. HOTLINEGAMES adds a lubricating material to the PTFE for a smoother glide on cloth and nylon pads. They're a big improvement over worn stock skates for very little money, though they don't feel as refined or last as long as premium options.

A budget buyer with worn stock skates who wants a quick, affordable upgrade they can order on Amazon. The pre-cut 0.8mm PTFE matches the mouse's shape and thickness, and the added lubricating material helps on cloth and nylon pads.

You get two full sets of 0.8mm virgin-grade PTFE skates with rounded edges that glide well right out of the package, with no break-in period. 3M no-residue adhesive keeps them secure, and the kit includes alcohol pads and a tool to help remove the stock skates. It's a solid, no-frills replacement, and the spare set means you're covered when the first one wears out.

A player who wants an affordable replacement with a spare set. Two full sets of 0.8mm PTFE glide well right out of the package, and the alcohol pads and removal tool help when swapping the stock skates.

They use aluminosilicate glass with curved edges for an extremely fast, low-friction glide, and like other glass skates they barely wear down. The kit includes a tool for removing the stock skates and wipes for cleaning off old adhesive, which makes installation easier. Just know that the glide is very slick, so you may need to lower your sensitivity at first.

A player curious about glass skates who wants to try one on the Superlight 2. The extremely fast, low-friction glide barely wears down, and the removal tool and cleaning wipes make installation easier.
A lower sensitivity setting helps while adjusting to the slick feel.

KRYOS uses a perforated, crystal-inspired hollow design that EspTiger says cuts skate weight by up to 50% without collapsing. They're 0.8mm thick to keep the Superlight 2's original height, include sensor coverage, use 3M adhesive and come with cleaning wipes. EspTiger says they glide well on cloth, hard and glass pads.

A weight-conscious player who wants to shave every gram off an already light mouse while keeping a smooth PTFE glide. The hollow design cuts skate weight by up to 50% without collapsing, and the 0.8mm thickness keeps the original height.

The DEX has a different shape from the standard Superlight 2, so its skates aren't interchangeable. These 0.8mm PTFE skates are cut for the DEX, with rounded edges and two sets in the box.

A Superlight 2 DEX owner who needs skates cut for the DEX's different shape. The two sets in the box give a spare when the first wears out, and the 0.8mm PTFE with rounded edges is an easy, affordable swap.

They bring the same fast, low-friction aluminosilicate glass and curved edges as TALONGAMES' standard Superlight 2 glass skates, cut for the DEX's asymmetrical shape. Glass lasts far longer than PTFE, but the glide is very fast, so it suits players who already like a quick setup.

A DEX owner who already likes a quick setup and wants the speed and durability of glass. The fast, low-friction glide barely wears down and is cut for the DEX's asymmetrical shape.